本文目录
想请教OFFER详细分析，HKU Msc LIM，懂得入 ：）
楼主，HKU本身确实实力很强，这几年越居亚洲第一，不过这个专业和你的本科专业并不对口，而且HKU是人文较强，这个专业还是不错的，不过你的职业规划师咨询师，这个无疑对你的职业理想有很大挑战。当然，和英国前十的商院也没有办法比，差得很远。HKU近几年的水平下滑很严重，个人不是很喜欢HK的中西半拉子教育模式，英语环境远远没有你想得好，香港的年轻人的英语水平比起殖民时期差了很多。口音也很重，不过在亚洲也算可以。楼主第一需要考虑是否想去欧洲发展，第二就是咨询师这个专业是不很靠边的。建议楼主去英国的商学院，学习Financial 或者 Marketing。当然了LSE是最好的选择
怎样让红旗linux上完WINDOW游戏,就是wine具体怎么安装配置
你应该下载.rpm后缀的文件,.tga的需要你自己编译,已经下载的这个别要了，重新下载个.rpm的吧，有管理员权限的话双击就安装了。安装完先要对wine进行配置正确安装完软件之后,最主要的事情就是配置wine.conf文件.大家主要配置的是指定盘符和路径我的windows分区有四个，分别为c,d,e,f，所以我在linux的/mnt目录中建立了c,d,e,f四个目录，这样对应windows中的四个盘。光驱为/mnt/cdrom目录，软驱为/mnt/floppy目录。所以我的wine.conf配置文件如下：Path=/mnt/floppyType=floppyLabel=FloppySerial=87654321Device=/dev/fd0Path=/mnt/cType=hdLabel=MS-DOSFilesystem=win95Path=/mnt/dType=hdLabel=MS-DOSFilesystem=win95Path=/mnt/eType=hdLabel=MS-DOSFilesystem=win95Path=/mnt/fType=hdLabel=MS-DOSFilesystem=win95Path=/mnt/cdromType=cdromLabel=CD-RomFilesystem=win95Path=/tmpType=hdLabel=Tmp DriveFilesystem=win95Path=${HOME}Type=networkLabel=HomeFilesystem=win95Windows=c:\windowsSystem=c:\windows\systemTemp=h:\Path=c:\windows;c:\windows\system;e:\;e:\test;f:\SymbolTableFile=./wine.sym其中为wine.conf文件中的默认临时文件，只需改动盘符即可。在wine.conf中需改动的地方还有：;; WineLook=xxx (supported styles are ’Win31’(default), ’Win95’, ’Win98’)；WineLook=Win95把WineLook=Win95前面的；号去掉即可。现在wine.conf的配置就大功告成了。现在给出我的wine.conf文件的配置给大家参考：;;;; MS-DOS drives configuration;;;; Each section has the following format:;; ;; Path=xxx (Unix path for drive root);; Type=xxx (supported types are ’floppy’, ’hd’, ’cdrom’ and ’network’);; Label=xxx (drive label, at most 11 characters);; Serial=xxx (serial number, 8 characters hexadecimal number);; Filesystem=xxx (supported types are ’msdos’/’dos’/’fat’, ’win95’/’vfat’, ’unix’);; This is the FS Wine is supposed to emulate on a certain;; directory structure.;; Recommended:;; - "win95" for ext2fs, VFAT and FAT32;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended);; DON’T use "unix" unless you intend to port programs using Winelib !;; Device=/dev/xx (only if you want to allow raw device access);;Path=/mnt/floppyType=floppyLabel=FloppySerial=87654321Device=/dev/fd0Path=/mnt/cType=hdLabel=MS-DOSFilesystem=win95Path=/mnt/dType=hdLabel=MS-DOSFilesystem=win95Path=/mnt/eType=hdLabel=MS-DOSFilesystem=win95Path=/mnt/fType=hdLabel=MS-DOSFilesystem=win95Path=/mnt/cdromType=cdromLabel=CD-RomFilesystem=win95Path=/tmpType=hdLabel=Tmp DriveFilesystem=win95Path=${HOME}Type=networkLabel=HomeFilesystem=win95Windows=c:\windowsSystem=c:\windows\systemTemp=h:\Path=c:\windows;c:\windows\system;e:\;e:\test;f:\SymbolTableFile=./wine.sym# 《wineconf》EXTRA_LD_LIBRARY_PATH=${HOME}/wine/cvs/libDefaultLoadOrder = native, elfdll, so, builtinkrnl386 = kernel32gdi = gdi32user = user32commdlg = comdlg32commctrl= comctl32ver = versionshell = shell32lzexpand= lz32mmsystem= winmmmsvideo = msvfw32winsock = wsock32kernel32, gdi32, user32 = builtinkrnl386, gdi, user = builtintoolhelp = builtincomdlg32, commdlg = elfdll, builtin, nativeversion, ver = elfdll, builtin, nativeshell32, shell = builtin, nativelz32, lzexpand = builtin, nativecommctrl, comctl32 = builtin, nativewsock32, winsock = builtinadvapi32, crtdll, ntdll = builtin, nativempr, winspool.drv = builtin, nativeddraw, dinput, dsound = builtin, nativewinmm, mmsystem = builtinmsvideo, msvfw32 = builtin, nativemcicda.drv, mciseq.drv = builtin, nativemciwave.drv = builtin, nativemciavi.drv, mcianim.drv = native, builtinmsacm.drv, midimap.drv = builtin, nativew32skrnl = builtinwnaspi32, wow32 = builtinsystem, display, wprocs = builtinwineps = builtinicmp = builtinAllocSystemColors=100;Read documentation/fonts before adding aliasesResolution = 96Default = -adobe-times-Com1=/dev/ttyS0Com2=/dev/ttyS1Com3=/dev/modem,38400Com4=/dev/modemLpt1=/dev/lp0LPT1:=|lprLPT2:=|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -LPT3:=/dev/lp3;read=0x779,0x379,0x280-0x2a0;write=0x779,0x379,0x280-0x2a0Exclude=WM_SIZE;WM_TIMER;; Paths must be given in /dir/dir/file.reg format.; Wine will not understand dos file names here...; alternate registry file name: HKCUAltCurrentUserFile=; alternate registry file name: HKUAltUserFile=; alternate registry file name: HKLMAltLocalMachineFile=;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.;Defaults are read all, write to Home and Alt;Note: it is pointless to specify alt files and neither load nor write to them.; Global registries (stored in /etc)LoadGlobalRegistryFiles=Y; Home registries (stored in ~user/.wine/)LoadHomeRegistryFiles=Y; Windows registries in windows path, aboveLoadWindowsRegistryFiles=Y; Load above registries.LoadAltRegistryFiles=Y; TRY to write all changes to home registriesWritetoHomeRegistryFiles=Y; TRY to write all changes to alt registriesWritetoAltRegistryFiles=Y;; WineLook=xxx (supported styles are ’Win31’(default), ’Win95’, ’Win98’)WineLook=Win95Default=Startup=;XtermProg=nxterm;InitialRows=25;InitialColumns=80;TerminalType=nxtermClearAllSelections=0PersistentSelection=1# 《/wineconf》我的星际争霸装在E盘的blood目录中，C盘为windows 系统盘，分别把c,e盘mount到/mnt/c 和/mnt/e中。星际争霸是一个256色的游戏，所以下一步是重新设定显示器的分辨率为640*480*8bit,8bit为256色。重新进X-WINDOWS,如果是rpm格式文件可以直接在windows终端下执行：wine /mnt/e/blood/starcraft.exe 硬盘一阵狂响之后就可以见到熟悉的星际争霸画面了，就可以HAPPY了！！
